E 5.165.7/01.13
74
Pressure Relief Valve
Poppet Type, Direct-Acting
Metric Cartridge – 350 bar
DB3E
Up to 15 l/min
Up to 350 bar
The pressure relief valve DB3E is a direct-
acting, spring-loaded poppet valve. Its
function is to relieve pressure in the system.
The spring exerts a force on the poppet and
presses it on the valve seat. On the opposite
side, the system pressure exerts force on
port 1 of the valve. If the hydraulic pressure
is below the pre-set spring tension, the valve
is closed. Only if the hydraulic force exceeds
the pre-set spring tension does the valve
open and ow is diverted to tank via port 2.
Important: Pressures at port 2 are additive to
the opening pressure!
If the connections are incorrect or if the
pressure has been set above the operating
pressure, the safety function of the valve is
disabled.
FEATURES
z Low hysteresis and accurate pressure control
z External surfaces zinc-plated and corrosion-proof
z Hardened and ground internal valve components to ensure minimal wear and
extended service life
z Adjustable throughout ow range
z Various pressure ranges up to 350 bar
z Guided poppet
FUNCTION
SPECIFICATIONS
Operating pressure: max. 350 bar
max. 100 bar at port 2 (tank)
Nominal ow: 15 l/min
Operating pressure ranges: 5 to 50 bar
10 to 100 bar
10 to 250 bar
20 to 350 bar
Leakage: leakage-free
Media operating temperature range: min. -20 °C to max. +120 °C
Ambient temperature range: min. -20 °C to max. +120 °C
Operating uid: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity range: min. 7.4 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 according to ISO 4406 or
cleaner
MTTF
d
150 years (see "Conditions and
instructions for valves" in brochure 5.300)
Installation: No orientation restrictions
Materials: Valve body: high tensile steel
Piston: Hardened and ground
steel
Seals: FKM (standard)
NBR (optional, media
temperature range
-30 °C to +100 °C)
Back-up rings: PTFE
Cavity: 05220
Weight: 0.053 kg
Adjustment
device
Valve body
Spring
Poppet
Valve seat